Fast, Reliable Spray Foam Insulation Across Burbank
Spray foam insulation in Burbank typically runs $3,200 to $9,800 for a full attic treatment, with rim joist work falling between $900 and $2,400. Most jobs are completed in one or two days. If you’re chasing aircraft noise from Hollywood Burbank Airport or fighting a second-floor bedroom that bakes every August, call us at (855) 362-0195 for a free estimate. We’re in the neighborhoods along Olive Avenue, Magnolia Boulevard, and Glenoaks regularly, and we know what these mid-century stucco homes need.
Burbank is a dense San Fernando Valley media town where tens of thousands of homes sit directly under the flight paths of Hollywood Burbank Airport and the surrounding film and TV production economy. Insulation here is as much about acoustic control as it is about thermal R-value. No neighboring city pairs aviation noise, studio corridor reality, and 1940s and 50s Valley tract housing quite the way Burbank does. That’s why we spec materials differently here than we do in Glendale or North Hollywood.
Why Even Air Insulation Is Burbank’s Preferred Spray Foam Insulation Company
Nelson Quirarte started Even Air Insulation to solve a problem Burbank homeowners know well: contractors who push one product because it’s what they stock, not because it’s what your specific house needs. We carry eight manufacturer lines, including Icynene, Demilec, and GreenFiber, so when a 1948 bungalow near the airport needs open-cell foam for noise, that’s what we recommend. When a newer hillside home above the 5 needs closed-cell for structural strength, we have that too.
Our crews work the flatlands between Buena Vista and Pass Avenue, the hillside streets above Kenneth Road, and the neighborhoods around the Studios. Burbank customers tell us the same things: the flyover rumble during peak departure windows is relentless, and the attic gets brutal in July. We solve both. Response time to Burbank is typically same week, often same day for smaller jobs like rim joist sealing or a garage ceiling.
Spray Foam Insulation Contractors in Burbank
Spray foam insulation contractors in Burbank handle the air-sealing and thermal work that older stucco-over-wood-frame homes need most. A proper job starts with identifying where air moves through the building envelope, then applying either open-cell or closed-cell foam to stop it. In Burbank’s 1940s and 50s tract homes, that usually means attic floors, rim joists, and the underside of roof decks. Expect to pay $4,500 to $9,800 for a whole-attic application in a typical 1,200 to 1,800 square foot Burbank house.
Open-Cell Spray Foam
Open-cell foam expands to fill gaps and creates an air seal while remaining vapor-permeable. We use Icynene open-cell in most Burbank attic upgrades because it performs well in hot, dry climates and excels at damping sound, which is a real benefit under the airport approach. Cost runs $1.80 to $3.00 per board foot in Burbank.
Closed-Cell Spray Foam
Closed-cell foam is denser, adds structural rigidity, and acts as a vapor barrier. Demilec closed-cell is our go-to for rim joists, crawl spaces, and roof decks where moisture or high summer attic temperatures are a concern. It runs $2.80 to $4.50 per board foot depending on depth and accessibility.
Spray Foam Attic Insulation in Burbank
Spray foam attic insulation in Burbank addresses the single highest-return energy upgrade most homes here can make. Attic temperatures in a Burbank summer routinely spike to 140°F or higher, which radiates down into living spaces and makes your air conditioner work far harder than it should. Spraying foam against the roof deck, or sealing and insulating the attic floor, cuts that heat transfer dramatically. A typical Burbank attic job costs $3,200 to $7,500 depending on square footage and whether we’re treating the floor or the roofline.
Rim Joist Sealing
Most Burbank homes leak air where the foundation meets the framing. Sealing rim joists with closed-cell foam stops drafts, keeps pests out, and reduces the stack effect that pulls hot attic air down through wall cavities. This is a half-day job, typically $900 to $2,400.
Garage Ceiling Spray Foam
Attached garages are common in Burbank’s flatland tracts, and an uninsulated garage ceiling lets summer heat pour into bedrooms above it. Foaming the garage ceiling creates a thermal and acoustic break that makes a surprising difference. Costs are usually $1,200 to $3,000.
Trusted Brands We Service in Burbank
We spray both Icynene and Demilec products, which gives Burbank homeowners access to open-cell and closed-cell formulations from the same contractor. Icynene for acoustic zones and vented attics, Demilec for high-temperature roof decks and moisture-managed assemblies. We also work with GreenFiber and Owens Corning for blended retrofit jobs where spray foam pairs with blown-in or batt insulation in non-critical cavities. Because we’re a multi-method specialist, not a single-product installer, we don’t have to talk you into a material that isn’t right for your house. The right insulation for the job, not just the one we happen to stock.
Common Spray Foam Insulation Problems We See in Burbank Homes
- Foam over old knob-and-tube wiring: Many 1940s Burbank tract homes still have knob-and-tube in wall cavities and attics. Foam applied directly over live knob-and-tube traps heat around the conductors and can create a fire hazard. We check for this before any spray, and we isolate or reroute wiring when necessary before spraying.
- Heat-trapping foam on poorly vented roof decks: Burbank attics hit 140°F in summer. If foam is applied under a roof deck without proper ventilation or a high-temperature-rated product, the foam can degrade and the shingle warranty can be voided. We spec Demilec’s high-temp closed-cell or an Icynene open-cell assembly with proper venting.
- Draft callbacks from single-pane windows: Stucco-over-wood-frame walls with aluminum single-pane windows have hidden air gaps that defeat spray foam’s air-sealing benefit unless window and duct sealing happen in the same retrofit. We flag this on every Burbank estimate so you’re not surprised by a lingering draft.
- Acoustic underperformance from under-specified foam depth: Under the airport approach, homeowners want noise reduction. A thin coat of foam helps thermally but does almost nothing acoustically. We calculate depth and density for sound attenuation, not just R-value, when aircraft noise is the complaint.
Pricing for Spray Foam Insulation in Burbank, CA
Whole-attic spray foam in Burbank runs $3,200 to $9,800. Rim joist sealing is $900 to $2,400. Garage ceilings run $1,200 to $3,000. Roof deck applications on the underside of sheathing run $5,500 to $12,000 depending on depth and square footage. Material choice moves the price: open-cell Icynene is the more economical acoustic option, while Demilec closed-cell costs more per board foot but adds structural strength and vapor control. Access matters too: low-clearance Burbank attics with shallow pitch take longer to spray. Estimates are free. Call (855) 362-0195 and we’ll give you an exact number for your house.
We Also Serve Cities Near Burbank
Our Spray Foam Insulation crews cover Burbank and the surrounding area, including Universal City, North Hollywood, Glendale, and Studio City. If you’re in one of those cities and need an honest material recommendation for your attic or rim joists, call (855) 362-0195. We’ll tell you what your house needs, not what we need to sell.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Spray Foam Insulation in Burbank
Yes. Spray foam reduces aircraft noise by filling the air gaps and cavities where sound travels through your attic and wall assemblies. The right open-cell foam, applied to proper depth, converts the conversation-stopping flyover rumble into a background hum. Beneath the Burbank flight paths, this is often the primary reason homeowners call us, with energy savings as a secondary benefit. Call (855) 362-0195 and we’ll assess your specific noise exposure.
Yes, but with an important caveat. We must isolate or replace knob-and-tube wiring before foam touches it. Spraying directly over live knob-and-tube traps heat and can fail inspection or create a fire hazard. On 1940s Burbank tract homes, we coordinate with an electrician or we handle the isolation work ourselves before spraying. Call us first and we’ll inspect for free.
For an underside roof deck application in a hot Burbank attic, we spec Demilec closed-cell foam rated for high-temperature exposure, paired with proper ventilation. For attic floor applications, Icynene open-cell is often the better value because it seals air while letting moisture move. The right answer depends on whether you’re insulating the floor or the roofline. Call (855) 362-0195 for a recommendation based on your attic setup.
You don’t need to replace them first, but you should address them in the same retrofit. Single-pane aluminum windows leak air around the frames and through the glazing, and no amount of wall foam will stop drafts if the windows are bypassing the air barrier. On stucco-over-wood-frame Burbank homes, we recommend window sealing or replacement alongside wall foam so you’re not paying for a half-done air seal.
Spray foam’s air-sealing properties reduce the volume of outdoor air that gets pulled into your home through attic and wall gaps. During Santa Ana-driven smoke events, a well-sealed building envelope means less smoke infiltration, especially when paired with good filtration. For Burbank homeowners who smell smoke indoors during fire season, we often find the point of entry is the attic. Foaming and sealing those gaps makes a measurable difference. Call (855) 362-0195 to schedule an assessment.
We recently sprayed open-cell foam in the attic of a 1948 stucco-over-wood-frame bungalow near Magnolia Boulevard and Hollywood Way in the 91505 ZIP. The homeowner was more bothered by aircraft noise than by summer heat. The original attic had only a few inches of degraded mineral wool and visible daylight at the top plates. After air sealing and spraying three inches of Icynene open-cell foam against the roof deck, the homeowner reported the flyover rumble went from conversation-stopping to background hum, and the attic peak temperature dropped noticeably within a week. That’s the outcome we aim for on every Burbank job.
Written by Nelson Quirarte, Owner at Even Air Insulation, serving Burbank and the San Fernando Valley.