Spray Foam Insulation in Beverly Hills — Same-Day Service, Done Right the First Time

Fast, Reliable Spray Foam Insulation Across Beverly Hills

Spray foam insulation in Beverly Hills typically costs $2,200 – $8,500 depending on the square footage and whether we’re sealing a garage ceiling, an attic, or a vaulted hillside assembly. Our crews reach most Beverly Hills neighborhoods within 24 – 48 hours of your call, and we schedule free estimates across 90210, 90212, 90209, and 90213 every week. Call (855) 362-0195 if you’re tired of rooms that never hold a steady temperature or an attic that bakes your second floor all summer. We know the older homes here well: the Spanish Colonials on Maple Drive, the mid-century boxes off Coldwater Canyon, the glass-walled hillside houses above Sunset. Each one needs a different approach.

Call (855) 362-0195

Why Even Air Insulation Is Beverly Hills’s Preferred Spray Foam Insulation Company

Beverly Hills homeowners don’t tolerate sloppy work, and the city’s permit and design-review process doesn’t either. We’ve worked on enough homes here to know that insulation upgrades in the Flats and the hills are usually part of a larger permitted remodel, which means documentation matters as much as the foam itself. Our Spray Foam Insulation team carries both Icynene and Demilec product lines, so we can match open-cell or closed-cell foam to the specific moisture and structural conditions of your house rather than forcing one product onto every job.

Nelson Quirarte, who leads Even Air Insulation, built the company around a simple rule: prescribe the right material for the application, not the easiest one to install. That’s why we stock Rockwool for fire-sensitive walls, GreenFiber for sustainable blown-in retrofits, and both Icynene and Demilec for spray foam where air-sealing chemistry actually pays off. In Beverly Hills, where homes range from 1920s plaster-walled estates to gut-renovated contemporary builds, that range matters.

We also understand the salt-air problem better than most contractors who drive in from inland. The marine layer that rolls over the Santa Monica Mountains and settles into Beverly Hills every morning doesn’t just cool the air. It corrodes metal. Fasteners, garage door springs, hinges, opener chains: they fail years earlier here than they do ten miles east. We account for that before a single drop of foam gets sprayed.

Spray Foam Insulation Contractors in Beverly Hills

Spray Foam Insulation Contractors in Beverly Hills work in a different environment than their counterparts in Culver City or Hollywood. The job here often starts with an inspection of what the salt air has already damaged, not just a measurement of wall cavities and attic square footage. A closed-cell Demilec application over a garage ceiling in the Flats typically runs $1,800 – $4,200, depending on the ceiling’s condition and whether we’re also replacing corroded hardware before sealing.

Garage Ceilings and Rim Joists

Garage ceilings in Beverly Hills take a beating. Morning marine-layer moisture, exhaust from idling cars, and the temperature swings between a cool garage and a hot finished room above create condensation. When spray foam is applied over corroded fasteners or rusting opener brackets, it traps that moisture against the metal. The foam eventually delaminates, and the corrosion accelerates underneath. We remove and replace rusted components before we spray, then use galvanized or stainless hardware that holds up to the coastal air.

Rim joist sealing is another common request in older Beverly Hills homes where the space between floor joists lets air and dust pour in from outside. Here in the Flats, the 1920s and 30s houses typically have rim joists that were never insulated, and the gaps are wide enough to lose significant conditioned air. Closed-cell foam seals them tight and adds structural rigidity, which matters on older framing.

Open-Cell vs. Closed-Cell in Beverly Hills

Open-cell foam from Icynene is the right call for interior walls where sound dampening matters and the cavity is accessible. It expands to fill irregular plaster-wall voids, which is common in older Spanish Colonial and Tudor Revival homes in 90210 and 90212. Closed-cell foam from Demilec is better for garage ceilings, rim joists, and hillside roof decks where moisture resistance and a vapor barrier are necessary. We carry both, and we’ll tell you which one fits the space.

Spray Foam Attic Insulation in Beverly Hills

Spray Foam Attic Insulation in Beverly Hills homes is a different job than what you’d find in a West Hollywood condo or a Century City tower. The housing stock here runs heavily to single-family estates, many of them built between 1920 and 1965, with attics that were either never insulated or insulated with a thin layer of aging fiberglass batts. A full attic foam application in Beverly Hills generally runs $3,500 – $8,500, with the higher end applying to hillside homes with vaulted ceilings and extensive glazing where standard blown-in insulation won’t work.

Hillside Vaulted Ceilings

In the hillside homes above Sunset Boulevard, vaulted ceilings and dramatic window walls are signature features. Standard blown-in attic insulation is often meaningless in these structures because there’s no flat attic floor to cover. Instead, the insulation has to go into the ceiling assembly itself. We apply Icynene spray foam directly to the underside of the roof deck, sealing the vaulted cavity and stopping the heat gain that turns those beautiful glass-walled rooms into greenhouses by mid-afternoon. On a 1960s hillside home off Benedict Canyon Drive, our crew applied Icynene spray foam to the vaulted ceiling assembly, but first had to replace corroded garage door springs and hinges that had rusted from years of marine-layer exposure. We used galvanized springs and stainless steel fasteners to prevent recurrence.

The lesson from that job applies across the hills: in Beverly Hills, insulation work and corrosion work are often the same job. You can’t seal a space properly if the metal inside it is already failing.

Attic Air Sealing in the Flats

In the Flats, attics are more conventional, but the heat gain is still significant. Beverly Hills sits in a Mediterranean climate where the real thermal enemy is summer heat pushing over the Santa Monica Mountains from the San Fernando Valley, not winter cold. An unsealed attic turns that heat into a radiant oven that cooks your top floor. We air-seal the attic floor penetrations before we apply foam, which keeps the conditioned air where it belongs and the 100-degree summer air out.

Trusted Brands We Service in Beverly Hills

We stock and service Icynene and Demilec spray foam products for Beverly Hills customers, which gives us access to both open-cell and closed-cell formulations. We carry Demilec for closed-cell applications where moisture resistance and structural strength matter: garage ceilings, rim joists, hillside roof decks. We carry Icynene for open-cell work in interior walls and vaulted ceiling assemblies where breathability and sound control are priorities. We also work with Owens Corning and GreenFiber for homes where fiberglass or cellulose is the better fit, which keeps us honest about when spray foam is and isn’t the right answer. Parts and materials for Beverly Hills jobs are typically staged within one business day.

Common Spray Foam Insulation Problems We See in Beverly Hills Homes

• Corroded fasteners trapped under old foam: Homes near the hills and canyon mouths get years of marine-layer moisture on exposed garage hardware. When spray foam is applied over rusted brackets or springs, the moisture gets sealed in and the corrosion accelerates silently. We remove and replace before we spray.
• Condensation in vaulted hillside assemblies: Above Sunset, vaulted ceilings with heavy glazing can create cold metal surfaces where condensation forms. If foam is installed without proper ventilation planning, that moisture sits on steel connectors and tracks, worsening corrosion. We address the ventilation path before the foam goes in.
• Plaster cracking in older Flats homes: The 1920s and 30s Spanish Colonial and Tudor Revival houses in the Flats often have irregular plaster wall cavities. Standard expansion foam can crack the plaster if applied too aggressively. We use open-cell Icynene in these walls because it expands more gently and fills irregular voids without stressing old plaster.
• Foam delamination over rusted garage door hardware: A garage ceiling that looks fine from below can be hiding rust on the springs and tracks. Foam applied over that surface won’t bond properly, and within a few years it starts peeling away in sheets. We test the substrate and replace corroded components with coated or stainless hardware first.

Pricing for Spray Foam Insulation in Beverly Hills, CA

We Also Serve Cities Near Beverly Hills

Our crews cover the neighborhoods around Beverly Hills every week, including Century City, West Hollywood, Culver City, and Hollywood. If you’re in West Hollywood and want the same corrosion-aware approach to Spray Foam Insulation in Beverly Hills, call us. The marine layer doesn’t stop at the city line.

FAQs About Spray Foam Insulation in Beverly Hills